Windows
		Double-Hung
		Slide-By
		Casement
		Awning
		Auxiliary*

Doors
		Hinged French
		Sliding
		Steel Entry*

Accessories
		Installation
		Interior Trim
		Exterior Trim

* Coming soon.

Send page to printer

Ascent Clad Double Residential Outswing Hinged French Doors (1/2006-Present) > Inactive Panel Assembly > Type II Inactive Panel Assembly

39-3/4 in. Shoot Bolts (#20234)

This part is no longer available. Replace with #GU1014.

These heavy-duty bolts connect to the top and bottom of the mortise door bolts to lock an inactive panel with Type I or II hardware.

The length of the top shoot bolt is 56¼ in. less than the height of the frame; refer to the chart below for standard sizes. The bottom bolt is 47¼ in. long, except for doors with a high-performance inswing sill, which take a 47 in. bolt.

Frame Height Top Shoot Bolt Length

6 ft., 8 in. 23¾ in.

6 ft. 10 in. 25¾ in.

7 ft. 27¾ in.

8 ft. 39¾ in.

10 ft. 63¾ in.

Series

Shoot Bolts
Compare All (8 options)

Standard Specifications

EagleVision+ Description TOP SHOOT BOLT 39.764" (8-0)
39.75" (QRG 10 A 10E) OBS USE #GU1014
FD WARRANTY

EagleVision+ Category GU

Lifespan 4/1997 - 9/1998

Availability Obsolete—Replace with Part #GU1014

Length 39.750 in.

Width 0.394 in (diameter)

Finish Zinc with Yellow Dichromate

Material Steel

DWG (Eagle Drawing Number) A03H

Move cursor to enlarge

Images for demonstration. Options of actual part may differ.

Engineering Drawings

Comments

When locked, shoot bolts pass through shoot-bolt guides at the top and bottom of the door and extend to the head and sill of the frame

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.