Windows
		Double-Hung
		Slide-By
		Casement
		Awning
		Auxiliary*

Doors
		Hinged French
		Sliding
		Steel Entry*

Accessories
		Installation
		Interior Trim
		Exterior Trim

* Coming soon.

Send page to printer

Colony White RetroFit Half-screen Retainers (#78240)

A popular option for RetroFit single-hung windows, the half-screen is held in place in clad units by an extruded aluminum retainer. The retainer is screwed to the bottom of the upper sash.

Benefits

Baked-on silicone polyester enamel coating conforms to AAMA 2604-98
Highly resistant to scratches and warranted against cracking, checking, peeling, flaking, blistering, adhesion, chalking and color change

Series

RetroFit Half-screen Retainers
Compare All (6 options)

Standard Specifications

EagleVision+ Description WHT DHRF HALF SCRN RETAINER
12-0 EWD-340
CRETRO

EagleVision+ Category AL

Lifespan 11/2003 - Present

Availability Current Replacement Part

Length 144.000 in.

Width 1.213 in.

Depth 0.765 in.

Material Aluminum

Color (View chart...) Colony White (WHT)

DWG (Eagle Drawing Number) A60P

Image for demonstration. Options of actual part may differ.

Engineering Drawings

Comments

To calculate the length of the retainer, subtract 4-1/2 in. from the width of the RetroFit window frame.
Attach to the sash with a minimum of three #8 x 1/2 in. Type A Pan-Head Phillips Teks� Point Self-drilling Screws, after drilling slots 1 in. from each end for a double-hung or 1-1/4 for a slide-by. Continue drilling every 12 in.
Cap each side with a foam end plug.
For clad single-hung half-screens other than Talon RetroFit, instead select standard half-screen retainers .

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.