This assembly contains 14 ft. of anodized sill nosing along with the parts needed to attach it to the clad frame and rough opening:
- One nailing fin along the lower inside groove
- One horizontal trim connector to fasten the extrusion to the accessory groove in the frame
- One vertical trim connector to snap the extrusion into the sill nailing-fin groove in the frame
A752 sill nosing is necessary for the deeper exterior casings A754 and A755. (A narrower model, A751 sill nosing, is also available, as well as the older A505 sill nosing for replacement.)
An installation kit is also available complete with end caps, weather strip and all the hardware you'll need for combining sill nosing with casing for jobsite installation (detailed in the comments, below).
Benefits
- Anodizing actually penetrates the aluminum like a stain penetrates wood, to provide unsurpassed beauty, hardness and consistency
- Highly resistant to scratches and warranted against cracking, checking, peeling, flaking, blistering, adhesion, chalking and color change
Series
|
Move cursor to enlarge
Images for demonstration. Options of actual part may differ.
|