Clad Double-Hung 45° Bay Cable Support Systems (#89900)
The cable support system provides adjustable support for projecting window units when used along with platform boards and structural support members of the building.
The core system is part #89904; additional parts in this series are customized to include unit-specific sill mull blocks (see Comments, below).
Benefits
- When used properly, this system will help reduce the weight carried by the platforms
- The cable support system also allows for convenient adjustment when leveling unit at the time of installation and also in the future, should additional adjustment be required
Series
|
Move cursor to enlarge
Image for demonstration. Options of actual part may differ.
|
Comments
- All cable support systems have the following parts:
- Instruction Guide (1)
- Straight Line Cable Clamps (2)
- Cables with Threaded Rods (2)
- #12 x 3-1/4 in. Type 17 Flat Head Screws (4)
- 5/8 in. "T" Nuts (2)
- Keyed "T" Washers (2)
- 1-1/4 in. Flat Washers (2)
- Lock Washers (2)
- 1/4 in. Hex Nuts (2)
- 1 in. Adjustment Hole Plugs (2)
- #3 Square Bit (1)
- Aluminum Bow and Bay Support Plates (4)
- Stainless Steel #8 x 3/4 in. Type A Pan-Head Phillips Wood Screws (16)
- In addition, this part includes two left-hand and two right-hand sill mull blocks. The angle of the miter cut varies with the angle of the bay or bow unit.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.
|