Universal Cable Support Systems (#89904)
The cable support system provides adjustable support for projecting window units when used along with platform boards and structural support members of the building.
The core system is part #89904; additional parts in this series are customized to include unit-specific sill mull blocks (see Comments, below).
Benefits
- When used properly, this system will help reduce the weight carried by the platforms
- The cable support system also allows for convenient adjustment when leveling unit at the time of installation and also in the future, should additional adjustment be required
Series
|
Move cursor to enlarge
Image for demonstration. Options of actual part may differ.
|
Engineering Drawings |
|
|
Comments
- All cable support systems have the following parts:
- Instruction Guide (1)
- Straight Line Cable Clamps (2)
- Cables with Threaded Rods (2)
- #12 x 3-1/4 in. Type 17 Flat Head Screws (4)
- 5/8 in. "T" Nuts (2)
- Keyed "T" Washers (2)
- 1-1/4 in. Flat Washers (2)
- Lock Washers (2)
- 1/4 in. Hex Nuts (2)
- 1 in. Adjustment Hole Plugs (2)
- #3 Square Bit (1)
- Aluminum Bow and Bay Support Plates (4)
- Stainless Steel #8 x 3/4 in. Type A Pan-Head Phillips Wood Screws (16)
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.
|