4-5/8 in. Oak Kerfed Extension Jambs (#222242)
Wood extensions attach to the interior of the window or door frame for the remainder of the wall depth. The kerf is designed to receive wire mesh at the end of a rounded wall.
In standard (right-angle) units, the left end of the extension jamb is intended to start flush with the finished end of the extension jamb at its left, as in this diagram. Cut off any excess material at the right or cover with trim.
Benefits
- Eagle wood components are treated with a preservative and insect repellent, dried, then finished with your choice of factory-applied stain and sealant or basecoat
- Available in nine wood species
Series
|
Move cursor to enlarge
Image for demonstration. Options of actual part may differ.
|
Engineering Drawings |
|
|
Comments
- To calculate the length of extension jamb for a casement window, subtract 2 in. from the frame's dimension.
- This part is for use with straight edges only. Request replacement extension jamb for the curved jambs in a radius unit as a custom order.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.
|