Right-Hand 18 in. Support Arms (#7705)
This hardware acts as the hinge for an awning sash. All awnings require both a left- and a right-hand support arm for the left and right ends of the sash (as viewed from the exterior).
This support arm is so named because it typically attaches to a 18 in. hinge track on the lock jamb.
Benefits
- Stainless-steel hardware provides maximum corrosion resistance and durability
Series
|
Move cursor to enlarge
Image for demonstration. Options of actual part may differ.
|
Engineering Drawings |
|
|
Comments
- Secure to sash with four #7 x 7/8 in. Type A Flat Phillips Wood Screws (#15746)
- Applies to awnings with frames at least 20 in. but less than 30 in. tall
- The right-hand version is marked with an "R" on the plastic slider (may be in reverse type)
- Left-hand model shown in engineering drawing
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.
|