Series: Installation Clips

This hardware is fastened to the jamb and wraps around both sides of the substrate to achieve structural ratings for installation. Place clips at least 6 in. from each corner. (See the Wintelligence® performance data for precise quantity and placement tested for the required design pressure.) Then, secure on the interior, if the unit is not a double-hung window. Finally, screw clips to the exterior. Parts Installation Clips (#67496) Common Specifications EagleVision+ Category HD Lifespan 8/2005 - Present Availability Current Replacement Part Length 12.000 in. Width 1.625 in. Depth 0.040 in. Material Galvanized Steel DWG (Eagle Drawing Number) A69C

Move cursor to enlarge Image for demonstration. Options of actual part may differ.

Applies To

• Installation
• View All...

Engineering Drawings

Comments

• Fasten to window or door jamb with a minimum of four #8 x 5/8 in. Type A Flat Phillips Wood Screws (#19841)
• Secure to the interior and exterior face of the rough-opening substrate with a minimum of four Stainless Steel #8 x 1-1/2 in. Type A Flat Phillips Wood Screws (#19840)

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.