Windows
		Double-Hung
		Slide-By
		Casement
		Awning
		Auxiliary*

Doors
		Hinged French
		Sliding
		Steel Entry*

Accessories
		Installation
		Interior Trim
		Exterior Trim

* Coming soon.

Send page to printer

Accessories > Exterior Trim > Subframe Shells

Moss Painted Subframe-Shell Head Panning (#96552)

This heavy-duty aluminum trim is the upper horizontal piece of the subframe shell. The head panning is 7½ in. longer than the width of the frame; cut as shown, or request factory preparation.

Benefits

Baked-on silicone polyester enamel coating conforms to AAMA 2604-98
Highly resistant to scratches and warranted against cracking, checking, peeling, flaking, blistering, adhesion, chalking and color change

Series

Subframe-Shell Head Panning
Compare All (33 options)

Standard Specifications

EagleVision+ Description 149 EXTERIOR PANNING HEAD 14-0
EWD-125
MULT

EagleVision+ Category AL

Lifespan 8/2003 - Present

Availability Current Replacement Part

Length 168.000 in.

Width 4.250 in.

Depth 4.750 in.

Material 6063 T-5 Aluminum

Color (View chart...) Moss (149)

DWG (Eagle Drawing Number) A42J

Move cursor to enlarge

Image for demonstration. Options of actual part may differ.

Engineering Drawings

Comments

Connect to each side with three #8 x 5/8 in. Type A Pan-Head Phillips Masonry Screws
Apply silicone sealant where the exterior edge meets the wall and along the seam with the sides of the subrame shell
Line the inner leg with glazing tape
Special clips connect the unit to the shell

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.