Windows
		Double-Hung
		Slide-By
		Casement
		Awning
		Auxiliary*

Doors
		Hinged French
		Sliding
		Steel Entry*

Accessories
		Installation
		Interior Trim
		Exterior Trim

* Coming soon.

Send page to printer

5-1/2 in. Adjustable Tilt-Latch Arms (#9577)

When the lower sash is open, turning the locks to "Wash" releases the tilt-latch arms.

The length of the arms is determined by the width of the double-hung:

Frame Width Arm Length

≤ 20.0 in. 3.5 in.

> 20.0 in. and < 36.0 in. 5.5 in.

≥ 36.0 in. 8.0 in.

Each operating double-hung requires two tilt-latch arms, which are interchangeable with left- and right-hand locks.

Benefits

Spring-loaded latches minimize potential damage to the window frame during closure

Series

Adjustable Tilt-Latch Arms
Compare All (3 options)

Standard Specifications

EagleVision+ Description ETDH ADJ TILT LATCH ARM 5 1/2"
#80235-AAO
ETDH

EagleVision+ Category ASH

Lifespan 4/2003 - Present

Availability Current Replacement Part

Length 5.5 in.

Width 1.2 in.

Depth 0.5 in.

Vendor Ashland Hardware

DWG (Eagle Drawing Number) A54K

Move cursor to enlarge

Images for demonstration. Options of actual part may differ.

Engineering Drawings

Comments

Surface tilt-latches are the corresponding parts on the upper sash
The hook on the tilt-latch arm connects with the double-hung locks to operate the latch and hold the part into place (the two screw holes are not used)

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this publication. However, Eagle Window & Door assumes no responsibility for its use. Refer to your local building codes for design requirements.